>
SNAIL

Snail est spécialement formulé pour la soudure des produits Kavalan.

Alors que les solutions soudables Kavalan, Sunlight Weldable et Butterfly Weldable, offrent une adhésion parfaite, le ruban Snail est le compagnon idéal pour tous les autres matériaux d'impression grand format de la gamme KAVALAN. Sans PVC bien sûr, le ruban Snail est si facile à utiliser, il possède un pouvoir adhésif exceptionnel et est parfait pour la soudure à haute fréquence (HF) et à chaud (HW).

 

Numéro de l'article
Case Studies
Numéro de l'article

Snail est spécialement formulé pour la soudure de tous les produits Kavalan.

Snail Tape
WELDING TAPE
  
Snail Tape - ST50
WELDING TAPE
  
SNAIL
Case Studies
Snail Tape
WELDING TAPE

Would you like more information, or do you have any questions about our products?

 

You can contact our sales team by calling +86-2164632409 or sending an e-mail to info@goforkavalan.com

PROPERTIES
MANUAL
Regular Width
2.5 m
Roll Length
100 m/r
 
MOQ
20 Rolls 
Thickness
0.15 mm
Please take note of the welding settings for temperature, pressure and time. It is recommended that welding temperatures are set between 140°C and 150°C.
1. When the welding temperature is below this range, the material may not fully melt and the quality of the bond may be poor.
2. When the welding temperature is above this range, the penetration of the melted tape may be too deep and its viscosity would decrease.
Storage conditions to achieve a shelf life of at least 2 years, should be:
1. Avoid direct sunlight and store in a cool and dry place.
2. The ideal storage temperature should be in the range of 10℃ to 20℃.
3. Keep away from naked flames and humid areas.
Snail Tape - ST50
WELDING TAPE

Would you like more information, or do you have any questions about our products?

 

You can contact our sales team by calling +86-2164632409 or sending an e-mail to info@goforkavalan.com

PROPERTIES
MANUAL
Regular Width
5.0 cm
Roll Length
100 m/r
 
MOQ
10 Rolls
Thickness
0.15 mm
Please take note of the welding settings for temperature, pressure and time. It is recommended that welding temperatures are set between 140°C and 150°C.
1. When the welding temperature is below this range, the material may not fully melt and the quality of the bond may be poor.
2. When the welding temperature is above this range, the penetration of the melted tape may be too deep and its viscosity would decrease.
Storage conditions to achieve a shelf life of at least 2 years, should be:
1. Avoid direct sunlight and store in a cool and dry place.
2. The ideal storage temperature should be in the range of 10℃ to 20℃.
3. Keep away from naked flames and humid areas.